Welcome to Linqing Hangce Bearing Co., Ltd.

Deep groove ball bearing

2022-06-02

Deep groove ball bearing (GB/T 276—2003) The original list of radial ball bearings is the most widely used type of rolling bearing. It is characterized by low frictional resistance and high rotational speed. It can be used on parts that bear radial load or combined radial and axial loads at the same time, and can also be used on parts that bear axial load, such as low-power motors, Automobile and tractor gearboxes, machine tool gearboxes, general machines, tools, etc.

The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. There are two types of deep groove ball bearings: single row and double row. The deep groove ball structure is also divided into two types: sealed and open. The open type means that the bearing does not have a sealed structure. The sealed deep groove ball is divided into dust-proof seal and oil-proof. seal. The material of the dust-proof sealing cover is stamped steel plate, which only serves to prevent dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent the grease in the bearing from overflowing.

Single row deep groove ball bearing type code is 6, double row deep groove ball bearing code is 4. It has a simple structure and is easy to use, and is the most commonly produced and widely used type of bearing.